M&C Construction Supplies

Con nuestra asesoría técnica y productos especializados,
tu proyecto de reparación se convierte en una inversión segura y funcional.

CONCRETE REPAIR, PROTECTION
& PREVENTION MATERIALS

Impermeabilization (Division 7):: Water intrusion is one of the leading causes of deterioration of structures and buildings, resulting in costly repairs, operational disruptions, and reduced service life. M&C Team offers a complete line of waterproofing solutions engineered to protect structures, whether protecting foundations, tunnels, parking structures, plaza decks, green roofs, or critical infrastructure.

Husky Yellow Guard 10 Mil & 15 Mil Vapor Barrier developed for use as durable vapor barrier, exceeds industry standard ASTM E 1745 Class A, B, and C specifications.

Click HERE for information.

Cem-Kote CW Plus is a crystalline/capillary waterproofing, Portland cement-based slurry containing silica-based materials. Under water pressure (negative or positive) the soluble silicate penetrates the substrate where it reacts with lime and forms insoluble calcium crystals which plug the capillary pores and waterproofs the concrete while allowing water vapor to pass.

Click HERE for information.

Cem-Kote Flex ST is a polymer-modified, highly flexible cementitious waterproofing; that can be used for interior, exterior, positive- and negative-side applications.

Click HERE for information.

Cem-Kote Flex CR is a highly flexible, fiber-reinforced, hydrogen-sulfide-resistant, two- component system, cementitious waterproofing.

Click HERE for information.

Adi-Con CW Plus is a crystalline waterproofing admixture designed to enhance the durability and water resistance of concrete and cementitious materials.

Click HERE for information.

Hydralastic 836 is a cold-applied, solvent-free, single-component waterproofing compound. Meets ASTM C 836 and local maximum VOC concentration limits.

Click HERE for information.

Mel-Drain drainage system combines a specially designed drainage core with geotextile filter fabric.

Click HERE for information.

Mel-Rol LM is a single-component, water-based, polymer-modified, cold-applied, waterproof membrane.

Click HERE for information.

Hydrastop SA is a waterproofing membrane for vertical applications where access to the site requires a pre-applied waterproofing membrane prior to pouring the foundation walls. It is a composite, self-adhered sheet membrane comprised of a non-woven fabric, elastomeric membrane, and coated release paper.

Click HERE for information.

Clay-Tite is a dual layer waterproofing consisting of virgin HDPE (20 mil), sodium-bentonite, and a protective layer consisting of a non-woven polypropylene.

Click HERE for information.

Clay-Tite Adhesive is a water-based acrylic adhesive containing emulsified bentonite.

Click HERE for information.

Clay-Tite Granular Pack is a package of bentonite clay granules that is used as a detail material in conjunction with Clay-Tite line of waterproofing products.

Click HERE for information.

Clay-Tite Mastic is a polymer-modified bentonite paste used in pipe penetrations, inside corners, voids, and tie-back cover details.

Click HERE for information.

KNIGHTSHIELD 5100 is a one-component, 100% silicone, moisture cure, waterproof roof coating that forms a seamless monolithic barrier to the effects weathering, ponding water, erosion and ultraviolet exposure.

Click HERE for information.

Meadow-Plug is a one-component, super-fast setting, hydraulic cement repair product designed to instantly stop running water or fluid seepage in concrete or masonry structures.

Click HERE for information.
Structural Repairs & Restoration (Division 3 & 32):: M&C Construction Supplies offers a full line of technically advanced mortars designed to offer solution-based repairs, rehabilitation, and reinstatement of structural concrete elements, such as roadways, bridge decks, columns, girders, abutments, retaining and parapet walls, dams, docks, piers, cargo ports, airports, sewer treatment plants, manholes, parking garages and any other infrastructure or civil rehabilitation needs.

Meadow-Crete GPS is a one-component, trowel-or pneumatically applied, migrating- corrosion-inhibitor enhanced, polymer-modified, shrinkage-compensated, fiber- reinforced, micro-silica enhanced, cementitious repair mortar for horizontal, vertical, and overhead applications.

Click HERE for information.

Futura-15 is a one-component, cementitious, rapid-hardening, structural repair mortar designed for horizontal applications having a 15-minute set time. Meets ASTM C928-99a Standards.

Click HERE for information.

Futura-45 is a one-component cementitious, rapid-hardening structural repair mortar designed for horizontal applications having a 45-minute set time at ambient temperatures.

Click HERE for information.

Futura-45 Extended is a rapid setting concrete, one-component, shrinkage compensated, proprietary blend of cements, aggregates, and performance-enhancing chemical additives having a 45-minute set time at ambient temperature.

Click HERE for information.

EZ Street Cold Asphalt is a mixture of asphalt, graded aggregates and polymer additives designed for the permanent restoration of asphalt or concrete. Ideal for potholes, utility cuts, edge of pavement repair, small overlays, driveways, parking areas, walks, and large cracks.

Click HERE for information.
Surface Renovation Material (Division3):: Meadow-Patch T1 is a one-component, polymer-modified, thin-patch cementitious repair mortar designed for horizontal, vertical, and overhead applications. This all-purpose mortar is designed for maintenance patching and minor repairs 1” to featheredge.

Click HERE for information.

Meadow-Patch T2 is two-component, polymer-modified, cementitious concrete resurfacer and repair mortar. This all-purpose mortar is designed for maintenance, patching, and minor repairs, 4” to featheredge.

Click HERE for information.

Meadow-Patch 5 is a one-component, cementitious very fast setting, low slump, restoration/repair mortar and water-plug.

Click HERE for information.

Meadow-Patch 20 is a one-component, cementitious, light gray, fast setting restoration/repair mortar. It is excellent solution for difficult vertical and overhead applications.

Click HERE for information.

Spectrum Re-Kote TF is a single-component, polymer-modified, containing a migrating corrosion inhibitor, rapid-hardening, cementitious concrete repair mortar designed for the renovation and resurfacing of deteriorated concrete surfaces.

Click HERE for information.

Floor-Top STG is a standard tra􏰀ic-grade, single-component, shrinkage-compensated, self-leveling floor topping and underlayment that may be pumped or poured; it is specially designed to smooth out uneven, rough or minorly deteriorated interior concrete floors.

Click HERE for information.

Meadow-Patch Smooth Grade is a is a single-component, polymer-modified, cement based, sands-free materia used for achieving an ultra-smooth finish on precast, tilt-up or other unfinished concrete surfaces. It has excellent workability for trowel application and has an extended pot life for enhanced working time.

Click HERE for information.
Crack Repair and Joint Restoration Materials:: Rezi-Weld Gel Paste and Rezi-Weld Gel Paste State are two-component, high viscosity, gel consistency, rapid setting, thixotropic, structural epoxy-based, chemical anchoring/bonding adhesives. Meet Federal Standards AASHTO M235, Type I, II, IV & V, Grade 3, Classes B & C; ASTM C 881, Type I, II, IV & V, Grade 3, Classes B & C.

Click HERE for information on Rezi-Weld Gel Paste
Click HERE for information on Rezi-Weld Gel State

Rezi-Weld 1000 is a muti-purpose medium-viscosity, two-component, construction-grade structural epoxy adhesive. Meets Federal Standards AASHTO M235, Type I, II, IV & V, Grade 2, Classes B & C.

Click HERE for information.

Rezi-Weld LV and Rezi-Weld LV State are moisture insensitive, very low viscosity, high modulus, high strength structural injection epoxy resins. Meet Federal Standards AASHTO M 235 Type I, II, IV & V, Grade 1, Class B & C; and ASTM C 881 Type I, II, IV & V, Grade 1, Class B & C.

Click HERE for information on Rezi-Weld LV
Click HERE for information on Rezi-Weld LV State

Rezi-Weld 3/2 is an epoxy grout-patch kit for grouting, sealing base plates, and patching concrete.

Click HERE for information on Rezi-Weld LV

Pourthane NS is an elastic low modulus, one component, moisture-curing non-sag, polyurethane sealant. It maintains flexibility and waterproofing joint sealing with high bond strength and provides outstanding durability in the civil and industrial construction markets. Meets Federal Standards ASTM C920-11, Type S, Grade NS, Class 35, T2, NT, O, M, G. TT- S00230C, Type II Class A USDA Compliant for use in meat and poultry areas. ISO11600-F- 25LM

Click HERE for information.

Pourthane SL is an elastic, one component self-leveling, premium grade polyurethane sealant specifically developed to be used as a multi-purpose horizontal joint sealant in applications where a high chemical resistant to fuels, oils, and hydrocarbons is required. The product is a moisture cure sealant with excellent adhesive properties and resistance to aging and weathering. Meets the standards of ASTM 920-11 Type S Grade P, Class 25, T2 NT, M, O, G, conforms to BS 5212 for determination of resistance to heat aging and fuel immersion. CAN CGSB 19. 13-M87, Classification C-1-40-B-N and C-1-25-B-N, No. 81028; Federal Specifications TTS-00230C. Type I, Class A, Approval Standards Conform to ISO 11600 F 25 HM. USDA Compliant for use in areas that handle meat and poultry.

Click HERE for information.
Anchoring and Bonding:: Rezi-We Acry-Lok is a high-solids, acrylic-polymer latex bond-enhancing admixture and bonding agent. When used as an admixture it provides increased abrasion and crack resistance, flexural strength, freeze-thaw tolerance, and reduced permeability. Meets ASTM C 1059-91 Type II (Non-Re-emulsifiable).

Click HERE for information.

Intralok bonding agent is a high-solids, water-based emulsion admixture suitable for modifying Portland Cement compositions. It is also designed for use as a bonding agent between new and hardened concrete. When used as an admixture with cement mortars or concrete it provides increased hard, tough and durable mixes, and superior tensile, flexural, impact strength, adhesive strength, and ultra-violet non-yellowing protection. Meets ASTM C 1059, Type 1 (re-emulsifiable).

Click HERE for information.
Construction Grouts: (Division 3:03.62.13 & 03.63.00):: Your precision equipment and structural elements need to be held steady in place. With our line of industrial and construction grouts, you can be assured that your machinery and structural elements will be safely and steadily held, even in the toughest and most stressful conditions. Our line of precision grouts allows you to select a product that is suitable for a wide variety of needs, whether High Strength, High Flow, or Extended Working Time.

CG-86 construction-grade cementitious grout is a non-metallic, mineral aggregate based, non-shrink economical grout. Meeting Standards ASTM 1107 (Grade A, B & C), Corps of Engineers CRD-C-621, and various departments of transportation.

Click HERE for information.

588-10K is a hydraulic-cement-based, non-shrink, non-corrosive, non-ferrous, mineral- based precision grout; load-bearing grout designed to transfer load e􏰀ectively and safely. Meeting Standards ASTM C1107, Corps of Engineers CRD-C-621, USDA Accepted.

Click HERE for information.

1428 HP hydraulic-cement-based, non-shrink, non-ferrous, mineral-aggregate-based, high-strength, precision grout. Meeting standards ASTM C1107, Corps of Engineers CRD- C-621, USDA Accepted.

Click HERE for information.

EG-96 HP is a three component, 100% solids, VOC and BGE free, epoxy resin system designed specifically for pours 1” to 8” thickness. It offers rapid strength development and excellent flow characteristics.

Click HERE for information.
Construction Liquids:: Curing Compounds are liquid membrane-forming compounds that, when applied to fresh concrete, reduce moisture loss in the early hardening period, resulting in improved hydration of the concrete.

Sealtight 1600-White is a water-based, wax-based concrete curing compound that when properly applied forms a premium-grade membrane, which optimizes water retention of fresh concrete.

Click HERE for information.

TOPCURE (10’ x 250’ roll) is a patented 7-days reusable concrete wet-cure cover and floor protector. Meets ASTM C171 standards.

Click HERE for information.

Med-Cure ready-to-use, colorless, water-based, VOC compliant concrete curing agent, hardener, and dustproofer. Meets the moisture retention requirement of ASTM C309 Type 1 or Type 1D, Class A.

Click HERE for information.

Curing and Sealing Compounds are designed to be used on fresh concrete to cure, and then will also remain on the concrete to o􏰀er additional benefits of a sealer, such as improved appearance and improved resistance to chemicals, water, de-icing salts, etc.

VOCOMP 25 is a ready-to-use, concrete curing and sealing compound formulated of special acrylic polymers in a true water-based carrier. It resists yellowing from ultraviolet exposure and provides a durable, long-lasting finish.

Click HERE for information.

Top-Stop is a spray-applied, water-soluble surface retarder designed to slow the set of surface mortar in concrete to expose aggregate.

Click HERE for information.

Top-Stop CED controlled etch depth concrete surface retarder, spray-applied, that provides a variable etch exposure.

Click HERE for information.

Evapre is an economical evaporation retardant, high-quality, water-based compound designed to form a thin monomolecular film to reduce rapid moisture loss from the concrete surfaces prior to curing. It also provides significant aid in producing high-quality concrete flatwork.

Click HERE for information.
Concrete Densifiers and Hardeners:: Intraguard is a water-based, water-repellent, penetrating silane/siloxane sealing compound for concrete and masonry surfaces.

Click HERE for information.

Liqui-Hard concrete densifier and chemical hardener compound is proprietary, water- based, ready-to-use, clear silicate liquid to harden and dustproof concrete.

Click HERE for information.

Liqui-Hard Ultra concrete densifier and chemical hardener is a waterborne, lithium- silicate-based, ready to use, colorless liquid, which hardens and dustproofs concrete at a molecular level.

Click HERE for information.
Forms Releases:: Duogard multi-reactive form release is composed of an organic chemical that reacts with the alkali content of concrete to form a release film that effectively inhibits the bonding of the concrete to the form.

Click HERE for information.

Duogard II is a water-based form release agent.

Click HERE for information.

Duogard Citrus is a citrus-scented, multi-reactive form release agent; composed of an organic chemical that reacts with the alkali content of concrete to form a release film that effectively prevents the bonding of concrete to the form.

Click HERE for information.

Solución a:

Fisuras, grietas y desgaste estructural

Impermeabilización y protección contra humedad

Restauración de pisos, muros y fachadas de concreto

Sellado para concreto nuevo y existente

Reparación de tardes

Contacto:

787-529-0647
warehouse@mcconstructionsupplies.com